technical-innovations-awards

Datos generales
Resultados
Jurado
Galería de imágenes

Feria de Zaragoza, aware of the fact that the factors such as the I+D+I, quality, environmental commitment, work sustainability and security must be principal and permanent activities to obtain greater competitiveness which collaborates decisively on the stable, sustainable market and economically in progress, provides the exhibitors with the Technical Innovation Contest. The Technical Innovation Contest counts on outstanding members of the sector, who evaluate candidate product every year, analysing thoroughly its characteristics in order to determine the ones which contribute to the sector with remarkable innovation. The grand of those outstanding professionals of the denomination of Technical Innovation for the product is, without a doubt, the appreciation of the exemplary work.

ACTA

The Jury met on December 17 to issue the decision of the FIMA 2020 Technical Novelties Contest.

See the result by clicking on the link at right.

DESCARGAR ACTA

BASES

The Bases of the Technical Innovations Awards contains the essential requirements to participate in the call, as well as the key dates, composition of the jury and provision of the Contest.

DESCARGAR BASES

Tractors, self-propelled machines and energy.

Business	Procedencia	Product
JOHN DEERE IBÉRICA, S.A.	ESPAÑA	John Deere eAutoPowr infinitely variable electromechanical transmission and e8WD smart traction system with Joskin Multi-mode infinitely variable transmission, with electromechanical power split and electric power generation , allowing its use in the tractor itself (onboarding) or by electrified implements (offboarding). John Deere and Joskin have worked together to come up with a highly productive solution based on a traction assist system for liquid manure application. The eAutoPower infinitely variable transmission replaces hydrostatic modules with an electromechanical module that delivers up to 100kW of electric power in the form of 700 V direct current (DC) or three-phase 480 V alternating current (AC) for several applications and implements.
SAME DEUTZ-FAHR IBÉRICA, S.A. – SAME	ESPAÑA	Frutteto CVT ActiveStee rear wheel steering system for tractors 2+2 RM type vineyard tractor with CVT and four-wheel drive. With the steering control in the usual position it acts like a conventional tractor turning the front axle wheels. It allows a proportional position in which instead of turning the front axle wheels it also turns the rear axle wheels in the opposite direction which reduces the turning radius; it permits a delayed proportionality of a few seconds on the rear axle wheels (for working with towed implements) and steering with the front and rear axle wheels turning in the same direction for lateral movement. It has a simplified CVT for compact tractors (hydro-mechanical/summing planetary) and the front axle is suspended with independent wheels
ADR GEPLASMETAL, S.A.U.	ESPAÑA	VARIOTRACK extendable axle track Mounting this extendable axle track on trailers and towed machines affords greater stability, it adapts to the lane and causes less compaction of agricultural land. Its features include: Hubs and bearings for a useful load of up to 14 t. Structure built with high-rigidity components. Threaded pins to facilitate mounting/dismantling and maintenance. Hydraulic track variation actuated directly from inside of tractor. Low-friction, high load capacity seals. Option of different brake units. Equipped with integrated inflating/deflating system in the steering knuckle
AGCO IBERIA, S.A. – FENDT	ESPAÑA	Automatic control system of vineyard implements for removing weeds on Fendt 200 V Varo - Braun Jointly developed by Fendt and Braun, the laser detects the contour of the ground, vines, stakes, etc. The gyroscope picks up the 3D position of the tractor. The information from the Braun RCP system is transferred by ISOBUS interface to the Fendt 200 V Vario. The tractor performs the steering commands and drives automatically between the rows of vines. The information from the Braun VPA system is transferred to implements between axles. The implements on the right and left are controlled independently in height and width. The positioning of implements is optimal to allow an ideal approach to the vines. Steering valve on tractor side with ISOBUS Interface. The components of the implement combination can also be used individually or in other combinations
AGCO IBERIA, S.A. – FENDT	ESPAÑA	Autodrive - Joystick on armrest that replaces steering wheel in Fendt Ideal grain harvesters The standard steering wheel is replaced by a joystick on the armrest of the left-hand side of the seat. The steering column is totally eliminated. The steering joystick has a smart control and provides a feeling of stability with touch and effort feedback and return to centre capacity. Closed-circuit control of rear wheel position. Adjustable position of armrest depending on operator's arm length. It can be raised to allow easy access to sit down and get up
AGCO IBERIA, S.A. – VALTRA	ESPAÑA	Valtra N4 and T4 hydraulic assistant Hydraulic assistant that automatically provides hydraulic flow to the electronic valves that require it, regardless of whether the tractor is stationary or moving, without affecting the driving speed. The hydraulic assistant is available in all of the Hitech, Active, Versu and Direct versions with electronic valves. The engine revolutions are adjusted when the hydraulic flow is required in each valve. The tractor speed does not change with the increase in revolutions More information
CLAAS IBÉRICA, S.A.	ESPAÑA	Cemos Auto Performance for combined control of engine power and forward speed of forage harvesters Automatic control of forward speed and engine speed, both in full load and partial load engine ranges. This allows the Jaguar to always operate at constant engine speeds when this system is used as well as within the optimized performance range in terms of engine consumption and power. The benefits in efficiency include fuel savings of up to 15% and a significant additional reduction in driver workload More information
CONTINENTAL TIRES, S.L.U.	ESPAÑA	Pressure and temperature sensor in VF TractorMaster Hybrid tyres The integrated tyre sensor provides constant information on pressure and temperature to ensure maximum tyre life with the correct pressure. VF technology allows 40% more load at the same inflation pressure or 40% less inflation pressure for the same load compared to standard tyres. The innovative design of the bead ensures a long service life and on-road comfort as well as high traction and low consumption in the field. The central band with overlapping blocks provides a great support surface, reducing noise and vibrations and making it ideal for transport
JOHN DEERE IBÉRICA, S.A.	ESPAÑA	John Deere 8RX - standard tractor with four integrated rubber tracks Standard tractor with four integrated rubber tracks. New version of the 8R with wheels, redesigned and optimized in terms of soil protection and traction. The four rubber tracks increase the bearing tread to a maximum of 4.57 m2, with a ground pressure transfer of 40.9 kPa. The travelling gear has be designed and optimized for traction. It design and shape, the bridge effect of the long treads, the long swivel frames, smooth speed integration, travel speed of 40 km/h and very wide tracks guarantee maximum application flexibility. The new cab suspension combined with the track travelling gear suspension guarantee maximum operating comfort
JOHN DEERE IBÉRICA, S.A.	ESPAÑA	Predictive control of feedrate in harvester Predictive and self-learning control of forward speed in harvesters which, in addition to the machine's internal sensors, uses information from a system of sensors focused in front of the machine, in connection with a satellite-based vegetation data model . This combination affords a high level of productivity thanks to the increased speed and significantly enhanced comfort in all harvesting conditions. The high-resolution satellite data recorded during different stages of growth provide the relative biomass distribution in the field .The system combines data from both sources of information. Optimum harvesting speed is automatically adjusted using the forecasted biomass data and the data from the machine's internal sensors. The system is self-learning which means that it continuously optimizes yield models and takes into account operator actions
NEW HOLLAND - CNH Industrial Maquinaria Spain, S.A.	ESPAÑA	Terraglide dual front axle suspension and Pneutrac tyre for compact tractors New Terraglide front axle suspension mounted on the Specialty Tractors T4 range, provides greater daily productivity, transport safety and outstanding comfort. This front axle suspension has been developed for customers who work on difficult terrain and hillsides and customers or service companies engaged in spraying phytosanitary products and who require optimum driving comfort as they probably do more than 1,000 hours of work a year. Terraglide is additionally enhanced with the use of new Pneutrac tyres that combine, in one product, the best features of traditional tyres and caterpillar tracks
RECAMBIOS FRAIN, S.L. – NOKIAN TYRES	ESPAÑA	Tyres with wireless pressure, temperature and wear sensors A combination of tyres equipped with sensors and a mobile app that records data and informs the user about tyre pressure levels and temperature. The sensors transmit data on the tyre pressure and temperature to the mobile app and to a cloud datastore. The system does not require any alterations to the vehicle: just the tyres with sensors and a mobile device. The sensor also warns of any increase in tyre temperature. Registering the tyres in the app the customer has an extended guarantee and direct contact with Nokian to solve any incidents or problems
TRELLEBORG WHEEL SYSTEMS ESPAÑA	ESPAÑA	Control system based on TLC Plus sensors Control system based on sensors that measure pressure in tyres. High-speed data transmission port with low energy consumption and secure connection. Four sensors with a service life of up to 5 years and premium measuring precision. Ensuring correct pressure in tyres can reduce variable costs in agriculture by more than 20% while protecting crops and enhancing operating safety. It reduces fuel consumption while increasing traction power. The TLC PLus app allows you access to your tractor data not just when you are next to the vehicle but also remotely from your office More information

Driven machines and fixed and mobile installations.

Business	Procedencia	Product
KUHN IBÉRICA, S.A.U. (RAUCH)	ESPAÑA	MultiRate small-scale metering and distribution system for pneumatic fertilizer spreaders The MultiRate metering system allows separate control for each individual outlet manifold. With a working width of 36 m and 30 outlet manifolds, it can control the fertilizer amount separately for each individual outlet. Each manifold can also be turned on and off individually. The air flow required to convey the fertilizer is provided by two turbines. The distributing and metering devices are in 30 separate sections, 15 on the left and 15 on the right of the machine so that the fertilizer can be metered separately in each of the air ducts and transfer from there to the 30 individual outlet manifolds.Each measuring shaft is driven individually by a 48V BLDC motor with 50 W rated power and 100 W maximum power. Exact control of speed in a range of 5-100 rev/min and of mass flow rate in a range of 0.5-10 kg/min. With a driving speed of 16 km/h and working width of 1-1.2 m per outlet manifold, a fertilizer mass flow rate of 0.5-10 kg/min allows spreading quantities of 1.5-30 g/m² to be measured More information
NEW HOLLAND - CNH Industrial Maquinaria Spain, S.A.	ESPAÑA	SmartshiftTMintermediate gearbox for start up of high-density Bigbaler The transmission of movement from the power take-off includes the SmartShift™ intermediate gearbox: with two-speed start-up, overload protection and smart brake system, large diameter flywheel: rotates at great speed (1440 rev/min). Two gears move the output shaft at 48 rev/min with arms that prolong the piston stroke to 748 mm. The start-up process connects and adjusts the tractor power take-off to 850 rev/min and the start-up process is activated from the monitor. The SmartShift™ gearbox connects 1st gear smoothly and then engages the 2nd gear. Finally the operator receives a message on the monitor to adjust the tractor PTO to 1000 rev/min; at that moment the flywheel will reach 1440 rev/min
AG-GROUP	ESPAÑA	DmaX AI-Sense mechatronic modular system for rotary harrow control AI-Sense is an additional feature of the IA (Alpego Intelligence) control system comprised by 2 modules:AI-Guard, to check vital machine and maintenance parameters. AI-Move for centralized management of all machine movements. There is a direct relationship between the refining obtained when working with a rotary harrow and changing certain of its parameters : 1. rotation speed of rotors / 2. work speed / 3. working depth / 4. work load on levelling bar. It is always possible to act on the first 2 parameters (no. 1 and 2) but the AI-Sense system also enables the other 2 parameters (no. 3 and 4) to be changed, significantly optimizing the work experience, preventing unnecessary consumption and simplifiying adjustment manoeuvres More information
ARCUSIN, S.A.	ESPAÑA	Articulated device for collecting silage bales on ground New loading device to pick up square silage bales from the ground and raise them to the platform of a self-loading machine with greater precision and better control. The system enables bales to be collected with greater precision and better control thanks to an articulated system that brings the terminal to ground level, reducing the step by means of a damping system that eliminates bale impact. Bales can be picked up at a higher travelling speed than that in current systems and collected more easily, reducing damage to bales caused by friction against the ground
BELLOTA AGRISOLUTIONS, S.L.U.	ESPAÑA	Notched discs for seed drilling and fertilizing Discs with recessed perimeter with notching. With the latest trends, such as increased working speeds, minimum ploughing and direct seed drilling, it has been found that the seed drill discs can begin to skid in furrows, spoiling the seedbed . This skidding means that instead of cutting up debris they move it causing obstructions and/or clogging. The notches give the discs better traction, reducing skidding and keeping the seedbed even. The sharp part of the notch helps cut up debris more effectively. The blade edge has a small notch and on the other side a deeper recess with a very sharp edge
CIMA SpA	ITALIA	DosA anti-drift diffuser with manual control on pneumatic sprayer The anti-drift diffuser limits the drift effect by producing, when necessary, larger droplets, without modifying either volume, air speed or the quantity of litres/hectare delivered and not altering the "low-volume" principles that are a guarantee of the effectiveness of pneumatic spraying equipment. Adjustment of the level of liquid spray is controlled directly by the operator from the cab, taking into account the prevailing environmental conditions (wind and/or proximity to areas where extra care is required)
COMPONENTES AGRÍCOLAS GENERAL, S.L.	ESPAÑA	Atomizer with direct dosing system, mixing and injection of phytosanitary product at the pressure outlet A system for direct injection of the pure phytosanitary product (Arag) is mounted on the water pressure outlet circuit, just in front of the nozzles, allowing 1 to 4 solid, soluble or liquid products to be dosed without any loss of the phytosanitary product and oing away with the need for operators to handle or mix the products inside the main tank as it only holds clean water. In the main tank and pump there is only water. The dosing interface for each product is carried out separately, as required, and controlled via a screen in the driver's cab, along with a variable dosing computer that can continuously adapt applications
DURÁN MAQUINARIA AGRÍCOLA, S.L.	ESPAÑA	Mastek Supercut debris crusher on universal bar for slurry spreading Universal dribble bar with a Mastek SuperCut crusher with 28, 40 or 48 outlets, with a capacity to crush long fibres; individual vents at each outlet. Screw-on adaptation to any type of tank. Automatic folding and shock-absorbing arms. It only requires a double-acting control. Light, sturdy and fully galvanized
FLIEGL IBÉRICA, S.L.	ESPAÑA	Fliegl Skate Compact – endless screw injector It works with a distributing endless screw. This distribution system is special because it allows transverse and longitudinal distribution without need of blades or any other crushing element. The injector is simple and light. In addition , it couples onto the tank perfectly, without requiring any complicated adjustments. It has a vertical folding system so that it does not need lateral support when being driven on the road and it incorporates a side box to remove foreign bodies
JOHN DEERE IBÉRICA, S.A.	ESPAÑA	Longitudinal vibration damping system when working with big balers In big balers, periodic variations in power and torque cause considerable vibrations that in turn are transmitted to the tractor and significantly affect the operator. Thanks to the smart control of the transmission, the active suspension system almost totally eliminates these uncomfortable movements, increasing comfort and safeguarding the operator's health and working capacity. Based on prior knowledge of the vibrations transmitted to the tractor, the tractor’s transmission is used to absorb these vibrations. This is carried out totally electronically, without the need for any additional hardware, using the smart control of the transmission components via a self-learning control algorithm
JOHN DEERE IBÉRICA, S.A.	ESPAÑA	ExactApply dual application system with RGB image sensors This system recognizes rows of plants and the weeds between the rows, allowing the timely application of herbicides at a speed of up to 25 km/h. The spray solution is supplied in very small quantities depending on consumption. A second automatic application can be carried out simultaneously, either in a precise manner on each row or over the whole of the area. The rows and between-row zones can be treated separately and selectively. RGB camera sensors along the sprayer boom are used to capture all of the green parts of the plant. Digital image processing is used to determine the rows and the weeds between rows, in order to apply treatments precisely The multi-nozzle spray gun with pulsing width adjustment can be used to carry out a separate, automatic second treatment with variable quantities and optimum droplet size
KUHN IBÉRICA, S.A.U. (RAUCH)	ESPAÑA	Hillcontrol system for AXIS and AXENT twin-disc fertilizer spreaders for working on steep slopes The system is a joint development by Rauch and IRSTEA. Using DEM (Discrete Elements Method) simulation, a calculation model has been developed that, depending on the flight characteristics of the fertilizer, the working width and slope, calculates optimal machine adjustments in terms of the location of the falling point of the fertilizer, the amount metered out and travel speed. On each side of the spreader, the effect of the slope on the spreading pattern, depending on the working width and type of fertilizer, is analyzed and the readjustment of the doser, the point of application and, if necessary the disc rotation speed is calculated. Depending on the type of fertilizer and the working speed on the slope, the point of application of the fertilizer on the disc and, as a result, the fertilizer spreading pattern can be changed More information
KVERNELAND GROUP IBÉRICA, S.A.	ESPAÑA	Turbo Ti-tiller cultivator with "smart farming" adjustment system Depth and levelling adjustments are controlled directly from the tractor cab via the ISOBUS terminal. In addition depth adjustment is combined with on-the-go dynamic traction control for fuel savings. Optionally, an automatic overload protection called Auto-Protect protects the frame of the machine. The cultivator integrates, in its work structure, load and stress sensors. It is capable of detecting traction slip and transmit the load to the rear axle (maximum 1800 kg) to optimize traction, achieving more efficient pulling and fuel savings. The drawbar sensors detect deviations in the force vector. The machine's levelling cylinders divided into four cavities, maintain the position of the chassis parallel to the ground when going up, down and on the flat
MARISAN BALBASTRE Y SANJAIME, S.L.	ESPAÑA	Marisan Eco-sustainable atomizer with water ozonization system The atomizer has a tank water ozonization system that guarantees excellent results in the field and is totally innocuous for the operators using it. Fitted with a hydraulic spraying system that guarantees it cannot be used for applying plant protection products. The absence of any chemical substances guarantees the sustainability of this process. Just a few seconds after application ozone transforms into oxygen without leaving any type of residue on the environment or on plants ensuring perfect traceability and no contaminating chemical agents
NEW HOLLAND - CNH Industrial Maquinaria Spain, S.A.	ESPAÑA	Big baler control system for damping longitudinal vibrations with T7 tractors Large square balers that allow transport and storage of a high density of plant material have gained increasing importance in agriculture. However, due to their high inertia and pressure they cause vibrations that subject the tractor cab to unpleasant pitching movements which in turn exerts pressure on the driver. The T7 tractor series detects when a baler is attached and activates the "baler" mode which manages control of front axle suspension, modifying stiffness in line with the bale compression in the baler. This prevents oscillations of the tractor-implement assembly, reducing cab movement on average by 15%, increasing comfort and reducing operator fatigue
NEW HOLLAND - CNH Industrial Maquinaria Spain, S.A.	ESPAÑA	Loop Master ™ double knot system for binding bales in Big Balers The loop-knotting process eliminates offcuts left loose on bale and in the field (reducing the environmental impact): in 10,000 bales produced, it is estimated that 6 km worth of twine offcuts per season are eliminated, that otherwise would normally be left to pollute the ground and crop. Loop Master ™ allows knots to withstand a 15% higher tensile strength and this translates into efficient baling and considerable benefits for productivity. Furthermore it reduces the twine cost for the same quantity of bales. It substantially reduces the risk of the twine snapping or knots untying with a higher bale density and lower knotting strain
PULVERIZADORES FEDE, S.L.	ESPAÑA	H3O See & Spray spraying equipment with 3D vision cameras S&S technology includes 3D vision cameras to meet the current need to perform precision treatments autonomously and provides exact computerized data with which to take better business decisions. The real limitations that operators in the field face when carrying out spraying operations have been taken into account, such as not being able to control the opening/closing of all of the nozzles or reacting immediately to the tree's exact requirements. Likewise, technicians and agricultural engineers require solutions that increase work efficiency such as the possibility of carrying out contour precision applications and having up to date information on the crop status available
SERVIMAC – Suministros Agrícolas e Industriales. S.L.	ESPAÑA	Rousseau E-Thénor electric arm mower Arm mower with electrically-powered rotor. The hydraulic power transmission has been replaced by an electric transmission to drive the rotor. Technology: the system consists of two identical synchronous modules. The first module is powered by the tractor PTO, this being the electric generator. The other module is used as a motor for the mowing head (with brushless /permanent magnet technology). The generator provides the energy the rotor requires in real time. This means that there are no batteries or capacitors to store energy and energy loss is kept to a minimum. Two frequency variators. One electrical power cable. One resolver cable to transmit controls and receive essential real-time feedback (speed, energy consumption, temperature, etc.). Two secure CAN networks Biodegradable cooling circuit to optimize operation by keeping the temperature at an optimal level to ensure efficiency of synchronous machines

Agricultural management solutions.

Business	Procedencia	Product
CLAAS IBÉRICA, S.A. / CNH Industrial Maquinaria Spain, S.A. (NEW HOLLAND - CASE IH) / JOHN DEERE IBÉRICA, S.A.	ESPAÑA	Multi-platform data accessibility The independent interface provided by 365FarmNet allows farmers to connect to the data portals of CNH, CLAAS, John Deere and 365FarmNet without any problem and take maximum advantage of the potential of a large fleet of machines. Data on the different machines and farming data are brought together in one single portal to offer a standard solution that is available to all users. DataConnect is the first "cloud to cloud" interface created by an independent manufacturer. This information includes both current data and a two-year data history of the level of fuel in the tractor tank, machine speed or the status of current work in progress. In the future, these farming data will help users to improve planning and to review compliance quickly and at any time. DataConnect is the basis of a new industrial standard. Coordination will be actively carried out via the AEF.
ESTEL. S.L.	ESPAÑA	Waatic system for efficient application of plant protection product The user enters the volume of solution to be applied and the system maintains contant dosing throughout spraying. An electronic box is fitted to the atomizer that is connected to the valves and sensors. It can be fitted to any atomizer /fogger and is compatible with the valves already installed in the atomizer. The electronic box connects wirelessly to a tablet installed in the cab, which acts as a user interface. Variable dosing maps can be entered and the dosing set in the map is applied at each point on the farm. All of the data are geolocated and application maps show data on dosed quantities of product on each part of the plot. These data are automatically stored in a local device and are synchronized with the intranet in the cloud when the tablet has internet connection
GOIZPER S.COOP.	ESPAÑA	Landrooter software for control of the Micron centrifugal sprayer on woody crops Software connected to Micron spraying machines. The electronic system controls and transmits key machine parameters in real time to ensure precise, correct applications and instantly returns information for analysis and use. The machine has 3 tanks: the main 60 litre tank, the 7 litre machine cleaning tank and the 15 litre hand cleaning tank. Electric pump. Flow control system. Electric piston to raise arm. Electronic control of the pump and motor. Bluetooth system to communicate with the user. Hoods adapted to the crop characteristics and the band width to be sprayed (40 cm to 120 cm) Software for farm management (workers, vehicles, products, plots, applications...) that includes a wizard for prepration of solutions, real-time data during work on speed and reports on the results of the applications More information
JOHN DEERE IBÉRICA, S.A.	ESPAÑA	Autosetup remote settings programming and scalable digital documentation system John Deere's AutoSetup system enables operators to store all of their necessary settings, to document in one go with one machine in the field via the computer, allowing the settings to be retrieved and reused at a later time. This allows all the settings for a field operation to be sent remotely to the tractor and activated with just one click in order to carry out the whole setup automatically. Work can be started quickly and at any time. The AutoSetup system allows separation of tractor and implement settings as well as to store and manage them remotely. The scalable digital documentation system combines manual documentation created with a smartphone and documentation for automatic viewing in John Deere's Operations Centre. Regardless of the documentation source, data are processed with the same professional tools. The scalable digital documentation system has new features: Combining different documentation systems and mutual supplementation to ensure complete, scalable documentation. The data are uniformly processed regardless of the source and are prepared for reports
KRAMP AGRIPARTS IBÉRICA, S.L.	ESPAÑA	Kramp Movile App. Locating parts in a database by means of an image of the original The application enables users to: Find the right product by scanning barcodes or searching by the product code, easily see the contents of a delivery/package by scanning the barcode on the package, quickly review orders and products received, take or upload a photograph to object recognition in order to analyze/find the product required (in beta version). Kramp can learn from customer comments and quickly improve the app. Product recognition is an innovative feature. Initially the app will not find all of the products but this function will improve over time thanks to your contributions and to automatic learning
KUBOTA	ESPAÑA	Kubota TIM remote diagnostics system Developed in collaboration with leading industry companies to align compatibility among products of different brands. Kubota has developed a verification platform of tractors and implements powered by them so that users can intuitively find where a problem lies and resolve it either directly or by contacting the right manufacturer. All the information is stored in the cloud so that it is accessible via the Internet
NANONORD A/S	DINAMARCA	TVESKAEG™ NMR multinuclear sensor for analysis of components by nuclear magnetic resonance spectroscopy Designed for industrial applications with a unique capacity to carry out quick, accurate analyses. The sensor uses nuclear magnetic resonance (NMR) spectroscopy as a source of quantitative and qualitative information on the atoms (nuclei) in the sample under investigation. When located in a strong magnetic field, the nuclei with a a nuclear spin behave like small magnets, which means that it is possible to communicate with them individually or collectively with radio-frequency pulses and obtain specific information about them through a radio-frequency transmitter-receiver system. The analysis is non-invasive, does not require lengthy calibrations or the use of chemicals with potential health effects or negative environmental footprint
NEW HOLLAND - CNH Industrial Maquinaria Spain, S.A.	ESPAÑA	AGXTEND-ISOMAX terminal to adapt older implements to the ISOBUS system It facilitates the adoption of the worldwide standard ISOBUS connection to interconnect agricultural machinery. The system that is totally certified by the AEF (Agricultural Industry Electronics Foundation) is universal, comprehensive and includes all of the elements (connector and ECU control unit) It can operate via any ISOBUS terminal. It allows owners of older implements to adapt them to technology and connect them to the tractor's ISOBUS system. All of the software and configurations are open source. This means that the system is compatible with all makes. The development kit is based on an ESP32 controller that uses the 32-bit system with all of the necessary interfaces for configuration so that any customer can begin to use it directly
RIEGOS IBERIA REGABER, S.A.	ESPAÑA	MINI SIGMA automatic screen filter with bluetooth control Automatic, self-cleaning screen filter: made with polymer materials; low operating pressure (1.5 bar). Control via ADI-P mobile app. The whole washing process is configured via bluetooth, with detailed information on filter performance. All information is recorded off-line. There are different input and output configurations and the possibility of vertical or horizontal installation which means it it is highly versatile and adaptable to any existing facilities. Filtering takes place as the water passes through the coarse screen, from outside, towards the fine screen and then passes from the interior of the fine screen to the exterior, where it emerges filtered. When dirt retained by the filter causes a load loss in the filter of 5 m.w.c. (adjustable) the filter washing process is triggered
RIS IBERIA, S.L.	ESPAÑA	Cloud Irrigation platform based on wireless autonomous two-way valves IoT management device that allows two-way connection of control valves in agricultural facilities with the platform that is hosted in an external server ("cloud"). The differentiating aspect of this device consists in it not requiring a local communication gateway (communications node) but rather it can connect independently from anywhere with 4G coverage. Information flows in two directions: towards the platform (cloud) and back to the valve itself. This has enabled the design of a management platform in which, thanks to inputs from other sources (NDVI indexes or field sensors), recommended irrigation algorithms can be modelled that can establish communications with the valve and automatically launch orders. Valves can therefore be monitored and controlled without the need of a mains connection or the availability of a prior wireless connection